Kentz ( Engineering and Construction ) Latest job vacancies



















CONTRACTORS MANAGER

Location: South Africa
Job Description:
·         Ensure that best safety practices are implemented, maintain standards of HSE and comply with Company’s HSE management system and OSHA requirements
·         Strict adherence to QAQC requirements
·         Compliance with Company policies and procedures, adhere to Company Code of Ethics and report any unethical and non-compliant activities
·         Management of shutdown activities including sub-contractors in accordance with set milestones
·         Liaison with the client to ensure that project objectives maintained, achieved and tracked
·         Highlight any potential threats, delays and opportunities that could impact the project
·         Control and monitoring budget, follow up on invoicing and cost control
·         Purchasing and controlling of assets
·         Adjudicate tenders, award and management of contracts
·         Ensure that all engineering practices are met
Job Requirements:
·         Relevant qualification in mechanical engineering
·         Minimum of 10 years’ experience in the construction / petrochemical industry
·         Must have the ability to prioritize tasks and plan accordingly
·         Excellent communication and interpersonal skills








































VALIDATION SPECIALIST

Location: Ireland
Job Description:
·         Generation / execution of System Impact and Critical Aspect Assessment Impact,  Pre-move Test documentation,  and Commisionng Test packs
·         Generation / execution of equipment and/or process validation protocols and reports, including  gap analysis of existing protocols against industry standards
·         Analysis of test data
·         Troubleshoots issues of diverse scope where analysis of data requires evaluation of identifiable factors.
·         Provides support or training to client on validation policies and procedures.
·         Provides general support to the Validation group to meet department goals and objectives.
Job Requirements:
·         Bachelor’s degree in an engineering or scientific discipline (e.g. chemistry, biochemistry).
·         Thorough knowledge of cGMP and regulatory requirements for validation
·         Minimum of 5 years relevant work experience which demonstrates knowledge of validation principles, including: validation planning, user requirement and functional specifications, commissioning, IQ, OQ, PQ and process validation.
·         Working knowledge of utilities, cleaning validation, and general production systems used in pharmaceutical manufacturing
·         Experience qualifying equipment and systems: incubators, autoclaves, clean utilities,...
·         Experience with Solid Dose Manufacturing and Packaging Equipment.
·         Strong working knowledge of statistics and analysis tools.
·         Strong word processing and spreadsheet skills, including processing of formulas.
·         Excellent verbal and written communication skills, including strong attention to detail regarding documentation is a must.
·         Excellent customer service skills.








































PROCESS ENGINEER

Location: Ireland
Job Description:
·         Review or assess process requirements
·         Developing process architecture
·         Execute material balances
·         Execute PFD’s
·         Writing and review equipment specifications
·         Definition of user requirements
·         Definition of project scope
·         Definition of project budget
·         Detailed engineering
Job Requirements:
·         Bachelor’s Degree in Chemical or Biological Engineering
·         Masters in a connected field is an asset
·         3-7 years’ experience in Pharmaceutical /Biopharmaceutical
·         Must be member of a Professional Engineer Association
·         Good knowledge of GMP and biopharmaceuticals regulated environments (US FDA, KFDA, EMA and WHO regulations)
·         Developed skills in process design and optimization
·         AutoCAD experience would be an asset
·         Ability to travel
·         Autonomous, discreet and organized
·         Interested in teamwork
·         Bilingual (French and English) oral and written





























PROJECT MANAGER VALIDATION

Location: Ireland
Job Description:
·         Manage all aspects of assigned projects, including:
Project quality: deliverables, documentation practices (including revision control)
·         Project budget, cost tracking, schedule, and staffing requirements
·         Project scope (e.g. change orders) and deliverables status
·         Status of invoicing and client payments (receivables and invoice aging)
·         Profitability of assigned projects
·         Identification of additional work based on client needs and/or requests
Job Requirements:
·         Bachelor’s degree in an engineering or scientific discipline (e.g. chemistry, biochemistry), PMP certification desirable
·         Minimum 10-15 years of relevant experience in the pharmaceutical or biotechnological field, with a background in validation or compliance (preferred) and project management
·         Knowledge in process equipment, sterilization, and pharmaceutical processes
·         Knowledge of FDA and European GxP regulations
·         Adaptable to the changing demands of a project and team, with good time management skills to handle multiple tasks and deadlines in a fast-paced environment
·         Well-developed leadership, communication, team-building, negotiating, presentation, commercial, and long-term relationship building skills are all required competencies

QC INSPECTOR - MECHANICAL

Location: Qatar
Job Description:
·         Attend all necessary inspections as identified in the approved Inspection and Test Plan (ITP).
·         Inspect the production quality to establish if the client requirements are being achieved.
·         Shall perform a variety of inspection functions under supervision
·         Record and document any and all deviations from the Project Quality Program (PQP) and the Company Integrated Management System (IMS).
·         Update the system with any and all deviations from the Project Quality Program and the Company Integrated Management System (IMS).
·         Coordinate  with  the  client  representatives   to  ensure  that  inspections  are  carried  out expediently.
·         Generate client Requests for Inspection (RFI) where required providing sufficient notice for hold, witness and inspection points.
·         Carry out inspections on Exception Items (EI) as documented and sign off a closed when activity is complete.
·         Continually carry out surveillance inspections on the project recording and documenting any and   all   deviations   from   the (PQP) and   the company Integrated Management System (IMS).
·         Review the calibration status of any test equipment being utilized on the project ensuring the equipment is within calibration prior to use.
·         Provide support and advice to the construction personnel in relation to the Project Quality Program and the Company Integrated Management System (IMS)
Job Requirements:
·       5 years minimum as a QC Mechanical inspector with experience working with static and rotating equipment
·       Oil and Gas Experience essential
·       Mechanical Engineering Degree / Diploma
·       Five or more year’s relevant experience in conducting inspections and QA/QC functions, preferably in the Oil and Gas industry.
·       Field inspection experience is mandatory.
·       Strong communication and organizational skills.
·       Demonstrate a good understanding environmental regulations and requirements.
·       Ability to influence and drive contractor to improve safety, quality, and production.
·       Ability to effectively engage with key stakeholders.
·       Demonstrates knowledge of Quality Surveillance.

LEAD SITE PIPING ENGINEER

Location: Qatar
Job Description:

·         Plan, coordinate and supervise major engineering work / activities carried out at site on an oil & gas project. Identify and resolve engineering issue.

Job Requirements:
·         BS Eng. or equivalent engineering degree from an accredited university
·         Minimum 10 years relevant experience in oil and gas industry and 2 years as Lead Field Piping Engineer
·         Experience with planning, coordinating and supervising major component / equipment engineering.
·         Possess computer knowledge in Ceasar II, 3D Review tool like Navis Works Review Reality Word and Excel
·         Must possess a good knowledge of piping mechanics and understanding of  pipe work and layout design
·         Familiar with Design codes and standards

LEAD SITE INSTRUMENT ENGINEER

Location: Qatar
Job Description:
·         Plan, coordinate and supervise major engineering work / activities carried out at site on an oil & gas project. Identify and resolve engineering issue.
Job Requirements:
·         BS Electrical / Instrument Engineering from an accredited university
·         Minimum 10 years relevant experience in oil and gas industry and 2 years as Lead Field Instrument Engineer
·         Experience with planning, coordinating and supervising major component / equipment engineering.
·         Experience in working of the following: DCS, PLC, SCADA, SIS, analyzer, F&G or metering systems
·         Familiar with Design codes and standards
CCMS Coordinator
Location: Australia
Job Description:
Kentz, a member of SNC - Lavalin is a global engineering specialist solutions provider, which serves a blue chip client base primarily in the oil and gas, petrochemical and mining and metals sectors. Its operations in Australia commenced in the mid-1980s and it now employs more than 2,000 staff in the region, part of a global workforce of over 15,500 people in 36 countries. We have provided Engineering, Construction and Technical Support Services (TSS) to clients in the energy and resources sectors for more than 90 years.
We have an immediate opportunity for an experienced Completions or CCMS Coordinator to join our Electrical and Instrumentation package on a LNG Construction Project in Darwin.
It is essential that you will have had experience using a construction completions management system to be considered for this position and be competent to analyse and interpret an introductory level of technical E+I construction information.
Job Requirements:
·         Highly computer literate and familiar with proprietary administration and document management software, ideally Construction Completions Management Systems (CCMS) or similar;
·         Good interpersonal skills
·         Experience with work packs
·         Completions administration background or document control experience will be highly regarded.

FIRE SYSTEMS ENGINEER

Location: Australia
Job Description:

·         Fire system/PAGA design, testing, trouble shooting and commissioning;

·         Inspection and auditing of fire systems/PAGA for specification and code compliance

·         Completion of design and test documentation and certification;

·         Influence, communicate and liaise with clients, internal colleagues, sub-contractors and suppliers

·         Generate and review detailed drawings and test procedures, supporting all activities from FAT through to commissioning.

Job Requirements:

·         Very strong commitment to (and focus on) safety;

·         Minimum 5 years comparable experience in a similar role;

·         Strong practical knowledge of Australian Fire standards e.g. AS 1670, AS 1851 and/or PAGA standards e.g. AS 60849;

·         Excellent written and verbal communications skills;

·         Exposure to and experience with design and commissioning of large scale distributed industrial fire/PAGA systems including gas suppression and smoke detection;

·         Knowledge and understanding of Notified and Vesda products;

·         Experience with hazardous area design, installation and relevant IS and Ex products; and

·         Degree, trade or relevant industry qualifications and certifications highly regarded.

APPLY NOW

CONSTRUCTION MANAGER

Location: Australia
Job Description:

·         To control the effective and profitable undertaking and completion of all construction/installation.

·         Note Position of Construction Manager only becomes necessary on large projects where the Project/Site Manager must have a Construction Manager in the team.

·         While on construction sites and in the development of relationships with clients, work towards continuing to source ongoing work for the Company.

·         The Construction Manager should call a preparatory meeting before construction on site begins. This should normally be held on site where it is practical to do so.

·         The preparatory meeting will be attended by the Project/Site Manager for the project and by the area supervisor who will have responsibility for the project. Where a project has designated Project Engineer he will also attend. The    Construction Manager may have others attend if he feels it is important to the successful undertaking of the project.

·         The meeting will agree a detailed programme covering all aspects of the progression of the project; this will include a detailed timetable for project completion.

Job Requirements:

·         Diploma in a construction Discipline

·         8- 10 years related work experience in Construction / Engineering and be aware of work involved with other disciplines

·         Experience working in Saudi Arabia

·         Good contractual knowledge.

·         Communication Skills

·         Management and delegation Skills

·         Codes of practice

·         International standards

·         Local regulations

·         General knowledge of project controls, tendering, planning

APPLY NOW








Previous
Next Post »

1 comments:

Click here for comments
August 4, 2016 at 7:17 PM ×

Email?

Congrats bro Нурболат Кашимов you got PERTAMAX...! hehehehe...
Reply
avatar