Oil and Gas Jobs at Qatar Petroleum Hot Jobs




Head Process Optimization

Location :  Qatar

JOB Description:
Manage and lead the group of process optimization engineers to evaluate and optimize the key process systems or parameters for the facilities within Dhukan operation and recommend to enhance or optimize Asset Integrity Operations.
Assess and advise new technology for plant improvement based on technical and economics benefits, validate chemical injection performance and conduct field trials for potential improvement to process systems.
Provide leadership and support to department management teams to achieve department objectives and targets.

EDUCATION:
B. Sc. Degree in Chemical Engineering or relevant engineering disciplines.
EXPERIENCE & SKILLS:
Minimum qualifications, certifications, skills, and years of relevant experience required for acceptable job performance.

Plant Inspector
Location:  Qatar




JOB Description:
Duties involve but are not limited to inspection of pressure and non-pressure oil and gas facility process equipment, all associated process and utility piping, transmission pipeline in order to ascertain and maintain design integrity of all equipment.
Fully utilizes the Risk Based Management Inspection System programme  in order to recommend repairs, remedial action and inspection frequency on oil and gas producing facilities.
He also attends meetings with Production mechanical or planning engineers and production field supervisors regarding implementation or scheduling and planning of all action reports.
The Plant Inspection Engineer reports to the Senior Inspection Engineer on all daily activities and during periods of annual leave may be required to perform the duties of the Senior Inspection Engineer.
EDUCATION:
B. Sc in Mechanical Engineering or equivalent b) Technical.
EXPERIENCE & SKILLS:
Minimum 10 years experience in inspection of pressure containing plant equipment preferably in an Oil or Chemical Refinery and Oil & Gas Processing Facilities.
Good  knowledge  of  International Codes and Standards  related to fabrication and Inspection of pressure vessels, associated piping, heat exchangers, storage tanks, etc
Good knowledge of welding techniques, procedures and welding examination.



Lab Technician I

Location: Qatar

 

JOB Description:

 


Sampling /analysis of gases, high pressure gases, acid gases & liquid sulphur. Carrying out physical and chemical tests on finished products or at intermediate stage and incoming feed streams, also on chemicals (DIPA, MDEA, Caustic, Acid etc.) used in the process. 
Adhering to international standard methods like ASTM, UOP, IP, SMS, HACH, etc.
EDUCATION:
Completion of Secondary (12 years) education followed by 2 years full time formal training in chemistry to OND level or equivalent.
EXPERIENCE & SKILLS:
5 years laboratory analytical experience in hydrocarbon testing.
Fair spoken and written English.

Plant Inspector

 Location: Qatar

 


JOB Description:

Undertakes inspection of pressure containing plant equipment, pipeline, and safety relieving devices to establish condition.
Prepares inspection reports outlining specific recommendations and liaises with maintenance engineers and field supervisors regarding their implementations.

 EDUCATION:

Academic: HND or equivalent.
Technical: NDT methods leading to ASNT / CSWIP / PCN Level-2 certification or equivalent at the discretion of OEI(G).
EXPERIENCE & SKILLS:
Minimum 8 years experience in inspection of pressure containing plant preferably in the refinery, chemical or oil & gas processing plants.
Good knowledge of international Codes and Standards related to fabrication and Inspection of pressure vessels piping, heat exchangers, and storage tanks, etc.
Good knowledge of welding techniques, procedures and welding examination.




Senior Engineer
 Location : Qatar

JOB Description:

Responsible for leading the corrosion protection team covering all assets in the Mesaieed Operations Operational Area.
Provides specialist technical expertise in corrosion processes, corrosion control, corrosion resistant materials, materials selection, environmental conditioning (including corrosion inhibitors), cathodic protection, coatings technology and failure analysis. Delegates most cathodic protection, corrosion monitoring and protective coatings  work to Senior Corrosion Engineer and Senior Coatings Inspector.
EDUCATION:

BSc Honours degree in Material, Metallurgy or Chemistry or equivalent engineering discipline with relevant training
EXPERIENCE & SKILLS:
Not less than 15 years relevant experience in the area of corrosion protection.
Preferable to have accreditation at senior levels from NACE or similar respected impartial authority.



Senior Engineer (Rotating Equipment - C/M)

 Location: Qatar

JOB Description:

To direct and oversee the successful operation of the IMS and RBI systems.  Provide support and guidance for the development and operation of the Inspection Management System and Risk Based Inspection System. Make decisions on scheduling of equipment based on RBMI results.
To promote standardization and utilization of the Corporate IMS and RBI systems within QP.
To prepare and maintain long and short-term plans based on the business requirements and the available resources in the users areas.

EDUCATION:
B.Sc or equivalent in Mechanical/Metallurgical Engineering. Registered as Chartered or Incorporated Engineer through relevant institution.
Relevant Qualification in Inspection Practices and Control.
relevant training / certification in computer applications.
EXPERIENCE & SKILLS:
Minimum of 10 years experience in Oil and Gas Industry.
Minimum of 10 years experience in the Inspection / Corrosion field.
Minimum of 5 years experience in operations of Inspection Management System and Corrosion Monitoring system.


Head , Project Control - Phase1

 LocationQatar

JOB Description:

Lead a team of project control professionals, which may includes project planning, cost control, procurement, document control and resource/logistical administration in coordination with project senior staff and QP relevant stakeholders.
Develop as required project control strategies, plans and procedures to achieve a holistic and integrated project control system during all phases of the project.
Ensure establishment of all required project controls systems, guide their set up and integration through common coding and structures.
Responsible for all management reporting and producing deviation reports and corrective action recommendation to Project Service Manager and Project Managers.
Provide guidance in the development and maintenance of all primary project services control documents, including; Contracts log, Change Order Register, Trend Register, Cost Report, Project Master Schedule and Risk Register.
Accountable for overseeing all commercial aspects involved in the development, tendering and execution of the EPIC Contracts and all Purchase arrangements made between QP and Suppliers.
Manage the assessment, negotiation and recommended settlement of all significant change orders and amendments in conjunction with the Project Service Manager, Project Managers and other members of the Project Services Team.
Manage the development of the cost estimate through to Final Investment Decision (FID) approval; ensure alignment of all stakeholders on cost and schedule and full transparency of the estimate development process.
Coordinate with the Finance Directorate to ensure timely processing and execution of all accounting and finance related activities for the project, with special attention to budget, funding and invoice payments.

EDUCATION:
Bachelor degree in an Engineering, or relevant commercial discipline from a recognized University; higher postgraduate degree in project management would be advantageous.
EXPERIENCE & SKILLS:
Minimum 18 years of relevant experience in the Oil & Gas Industry in major projects implementation, of which a minimum of 8 years will be in the position of Head/Lead Project Control Engineer with an Operator (NOC, IOC or Larger Independent) or EPIC Contractor.



Head, QA/QC Engineering

 

 Location: Qatar


JOB Description:

15 years relevant experience in the QA/QC processes and systems to be applied during design, procurement, installation, and commissioning activities within the upstream hydrocarbon process engineering challenges in particular for offshore installations and complexes.
This includes the integrity and safety challenges with processing H2S containing well fluids.
Extensive experience with the FEED and EPIC phase of larger projects is a requirement (Projects > 1 bln $US ).
This experience should include the responsibility for defining and managing the technical integrity processes including the management of (Independent Verification Bodies) though all phases of the project life cycle including the associated technical authority change and deviation management processes.
This in addition to the more standard QC roles during fabrication and construction.
These roles should have been performed on at least two projects for a duration of at least two years for a client organization (NOC or IOC).

EDUCATION:
The candidate should be a discipline QA/QC engineer with relevant University degree.



Interface Manager
 Location: Qatar

JOB Description:
Accountable for the management of the interfaces and project operation for the Bul  Hanine Redevelopment to ensure the delivery of safe, on time, cost efficient and predictable projects.
Management and leadership of the Interface organization responsible for the identification    and management of all key interfaces.
Management of the Project Operations in coordination with QP Operations relating to the operational,  maintenance or asset integrity and  commissioning aspects  with  focus  on the  successful execution of the projects on time, within budget and in accordance  with project  requirements,  specifications and standards.
Lead the development, implementation   and maintenance of appropriate interface/project operation management methods, systems and procedures.
.

EDUCATION:
B.Sc. degree in an Engineering discipline from a recognized University, higher degree would be advantageous.
Membership in a recognized professional engineering association or institution would be advantageous.
Experience & Skills:
A minimum of 18-20 years experience in engineering, project management and execution of major and mega Oil & Gas projects, of which a minimum of 10 years' experience in project management leadership roles with proven track record for major and mega Oil & Gas projects.
Experienced in developing and leading effective project organizations.
Experienced in the implementation of industry best practices and Company's systems, processes and standards.
Proven ability to apply sound judgment and analytical skills due to the complex and diversified nature of the position.
Extensive skills in management and leadership, team building, effective communication, conflict resolution and presentations.

Sr. Rotating Equipment Engineer

 Location: Qatar

JOB Description:

Responsible for the DISCIPLINE engineering activities and provide technical inputs to the design, engineering, fabrication and installation of Bul  Hanine Re-Development project scope;  with  focus on the successful execution of Bul Ranine Re-Development project on time, within  budget and  in accordance with the agreed  project requirements, specifications and  standards.
EDUCATION:
B.Sc. in respective or related discipline engineering from a recognised University, higher degree would be advantageous.
A minimum of 12 years Membership of a recognised professional engineering association (or institution) is preferable.
Experience & Skills:
experience in respective DISCIPLINE design in Oil & Gas Industry with an Oil & Gas Company or Consultant or Contractor, of which at least 7 years should have been in offshore Oil & Gas processing projects.
Of the 12 years experience, a minimum of 5 years should have been a senior DISCIPLINE Engineer in a major project in a reputable engineering consultant, EPIC contractors or O&G Company.
Fully familiar with Shell DEP's and other international design codes and standards.
Fully familiar with DISCIPLINE software and design review.
Familiar with all types of FEED and EPIC deliverables, equipment, design and construction progress reviews.





















 






Previous
Next Post »