Fluor Engineering and Construction Job Vacancies


Site Lead - Transient Airfield Fuels
Location : Qatar

Description:
The purpose of this contingent position is to perform the essential job duties and functions listed below with the overall objective of establishing a strategic partnership and support of operations demonstrated by making a positive impact on a project through the management of personnel and The development and implementation of programs and processes to support the mission. 

Site Manager will provide oversight for all Aircraft Servicer and Aircraft Servicer Foreman employees on the project. 

Attends contingency meetings, briefings, and participates in exercises involving transient aircraft. 

Ensures compliance with Hazardous material handling and Material Safety Data Sheet programs (IAW AFI 90-821) and all local procedures. 

Ensures that hazardous waste accumulation point (H-WAP) is emptied every 24 hours if full and transported to the Air Expeditionary Wing (AEW) Hazardous Waste disposal site. 

Monitors all transient aircraft ramp activities at all times. 

Dispatches personnel to drive and operate the mobile stair case unit as requested. 

Ensure effective tool control program is established in accordance with procedures specified in AFI 21-101 and Expeditionary Maintenance Group (EMXG) Operating Instructions (OI) to include lost tool procedures. 

Notify Airfield Management and wing safety office immediately when evidence of a bird strike is discovered. 

Implement and monitor a customer feedback program to measure customer satisfaction and take prompt corrective action on adverse trends. 

Submit appointment letters as defined in the PWS. 
Generate and submit reports including number of aircraft arrivals, departures, DVs, customer surveys, and other reportable events each month across all locations.

Maintains Aerospace Ground Equipment (AGE) necessary for the recovery, maintenance, inspection, servicing, or launching of aircraft. 





Qualification :

SECRET Clearance Required
Federal
Aviation Administration (FAA) Airframe / Power Plant License OR DD214
documenting aircraft maintenance experience


Mechanical Engineer
Location : Saudi Arabia

Description :

Mechanical Engineer. The selected candidate will be responsible for
roviding engineering oversight during the design and construction of
mechanical, piping, and HVAC system for various structures including stations, depots, maintenance facilities, etc. being constructed as part of a major railway construction project in Saudi Arabia. He will be responsible for
ensuring that good engineering practices are being followed and appropriate
construction methods are employed. 


The ideal candidate will have extensive railway
mechanical design and construction experience and having worked on Elevators & Escalators/ Train or Bus Stations/Airport.

Qualification :

Degreed Mechanical Engineer with minimum of 15years engineering and
construction expirience designing and building, mechanical, process and
plumbing system.

Excellent organizational and communication skills. A strong commitment
to filling a role as a key member of the PMC Team building one of the
preeminent railways project in the world.


Railway Operations & Maintenance Specialist
Location : Saudi Arabia

Description :

The Railway Operations & Maintenance Specialist shall possess
extensive experience in rail operations including simulations, fleet sizing,
scheduling, control center operations, back-of-house and front-of-house
operations. He will be familiar with various rail systems including high-speed
rail, and freight trains, and he will be experienced in optimizing services
provision through interoperability and RoW sharing. He will be able to develop
preliminary operations plans, including identifying staffing requirements.

Qualification :

Excellent organizational and communication skills. A strong commitment
to filling a role as a key member of the PMC Team building one of the
preeminent railways project in the world

Degreed Engineer with minimum of 15years Railway Operations


Rolling Stock Engineer
Location : Saudi Arabia

Description :





The Rolling Stock Engineer shall be experienced in the design of rolling
stock, including structural design, functional design and integration of
on-board components. He shall have an advisory and acceptance role on technical matters and shall conduct design reviews, ensuring their compliance with the specifications.

Qualification : 

Degreed Engineer with minimum of 15years engineering and construction
experience in designing Rolling Stock.

Excellent organizational and communication skills. A strong commitment
to filling a role as a key member of the PMC Team building one of the
preeminent railways project in the world.


Construction Manager
Location : Kuwait

Description :

The purpose of this position is to oversee and direct the performance of
all field construction activities for assigned projects typically with a value
between $50 Million and $150 Million; in conformance with plans,
specifications, schedules, and cost estimates. This role requires a working
knowledge and background of assigned work, the ability to cope with complex
situations through deliberate analysis and planning, and see actions at least
partly in terms of longer-term goals. The role continues to increase
proficiency to direct other line supervision as necessary in their respective
roles to meet or exceed all project objectives. This position requires the
ability to coordinate and direct construction craftsmen in numerous crafts
and/or to manage contractors/subcontractors for the same within the assigned
area of responsibility. This role may be referred to as Manager II, Construction. 


• Assure that all requirements and expectations of the Fluor Operating System Requirements (OSR), appropriate Operating System Implementation Plan (OSIP), and strict adherence to other business line requirements 

• Execute field construction activities in conformance with project drawings, specifications, schedules, cost estimates, procedures, quality requirements, and safety standards 

• Control project schedule and cost through the efficient use of all construction resources including manpower, materials, tools, and equipment 

• Monitor productivity and cost and implement appropriate action to maintain maximum labor productivity and cost-effectiveness 

• Play an active role in the development of the safety culture on the project, making safety a natural part of all work performed

Qualification :

Min. B.Sc Degree in Engineering 

Min. 12 years overall experience 

Min. 10 years Oil & Gas 

Min 5 years I speciality 

HND+24 years overall, 10 in similar position 

2 years with Fluor 

• Accredited four (4) year degree or global
equivalent in applicable field of study and sixteen (16) years* of work-related
experience or a combination of education and directly related experience equal to twenty (20) years* if non-degreed; some locations may have additional or different qualifications in order to comply with local regulations 


• Ability to communicate effectively with audiences that include but are not limited to management, coworkers, clients, vendors, contractors, and other stakeholders 

• Job related technical knowledge necessary to complete the job 

• Ability to learn and apply knowledge of applicable local, state/province, and federal/national statutes and guidelines 

• Ability to attend to detail and work in a time-conscious and time-effective manner

APPLY NOW

Lead Design Engineer – Electrical
Location : Kuwait

Description :

Member of the Electrical department for the Fluor Kuwait Project
Management Consultancy Services project. Reporting to the Lead Electrical
Engineer. Supporting the preparation of FEED packages undertaken by the Fluor UK office. Overseeing the preparation of electrical deliverables such as
electrical design basis, specifications, data sheets, Single Line Diagrams,
Load Lists etc. by the EPC Contractors during Detailed Design. Liasing directly with the Client on all facets of the electrical engineering scope of services. Providing technical support to the construction effort. Whilst the position is based in Kuwait the candidate must be prepared to accept business trips to attend EPC Contractor/supplier offices as required.

Qualification :

• B. Sc. Engineer 

• 10 years total minimum years experience 

• 8 years total minimum experience in Oil & Gas/ Refinery / Petrochemical Industry 

• 5 years minimum experience in Engineer - Electrical 

• 3 years minimum hands on experience in software for the automation in Electrical engineering.


Medical Logistics Site Superintendent

Location : Kuwait

Description :

erforms administrative and management functions in regards to medical
inquiries. Performs and monitors management (and procedural application) of
manual or automated inventory control actions. Computes and accumulates data for use in analysis. Helps develop work standards and methodology. Performs inventories, and ensures timely correction of discrepancies. 


Inspects and evaluates inventory medical activities. Periodically inspects activities for compliance with policies, procedures, and directives for accuracy. 

Prepares, analyses, and evaluates reports, procedures, and policy data.Analyzes reports and records activities, reports inefficiencies to supervisors, and recommends corrective actions to improve operations. Evaluates supply efficiency and equipment management activities.

Qualification :

CCAF or equivalent Logistics Management Associates degree desired. ­
Minimum four (4) years experience as Superintendent or equivalent desired.
Excellent Communication Skills (Speak, Read, and Write English
Fluently); 
US Secret Security Clearance required.

APPLY NOW

Associate Specialty Engineer II
Location : United States

Description : 

The purpose of this position is to apply a general understanding of
design engineering principles as listed. This role has the responsibility to
promote Fluor’s competitiveness within the global marketplace by delivering
quality services of unmatched value and technical competence. This position
supports the Area Lead or Lead on assigned projects and performs routine
aspects of engineering assignments, applying basic engineering principles. 


• Perform and check routine calculations, specify simple equipment, and solve problems of simple engineering complexity 

• Review vendor equipment documentation within the discipline and from other disciplines for compliance with project requirements, and actively seek discrepancy resolution 

• Monitor material estimates and quantities; participate in equipment and material procurement activities 

• Adhere to industry codes and standards as well as department practices and procedures 

• Analyze and make independent recommendations regarding solutions to problems with varying complexity in accordance with organization and/or project objectives and guidelines 

• Organize and prioritize a variety of projects and multiple tasks in an effective and timely manner, set priorities, and meet deadlines 

• Provides the accurate location and layout of the work within the lines, grades and elevations indicated on the design drawings. 

• Coordinate a utility crew performing probing work, underground pipe and foundation locating. 

• Civil Structural placement inspection 

• Manage survey equipment security, maintenance and calibration requirements. 

• Other duties as assigned

Qualification : 

• Accredited four (4) year degree or global equivalent in engineering
field of study and four (4) years* of work-related experience; a recognized
professional certification or registration in the applicable field, if
required; some locations may have additional or different qualifications in
order to comply with local regulations 


• Ability to communicate effectively with audiences that include but are not limited to management, coworkers, clients, vendors, contractors, and visitors 

• Job related technical knowledge necessary to complete principal job duties and responsibilities, including detailed knowledge of Fluor’s software tools and databases 

• Ability to learn and apply knowledge of applicable local, state/province, and federal/national statutes and guidelines 

• Ability to attend to detail and work in a time-conscious and time-effective manner


Capture Coordinator
Location : United States

Description :

Coordinates capture activities for the pursuit of large, complex federal
services projects. Works closely with the capture managers, business line
leadership, account management team and operations leads to assist with
development and lead execution of the capture strategy for assigned pursuits.
Represents Assists the capture team and Business Unit Director/Vice President on each assigned pursuits, providing overall leadership and management leading and managing specific project tasks as assigned from interest and bid decision through contract award and transition. May serve as Capture Manager for small proposals. 


•Coordinates closely with Operations Director and Capture team to pursue business opportunities within existing and new business areas 

•Supports the development and presentation of bid recommendations 

•Assists in development of comprehensive capture plans for specific pursuits 

•Helps develop win strategy, themes and discriminators 

•Prepares detailed competitor analysis to support the capture strategy 

•Supports the development of the cost and price-to-win strategy 

•Coordinates with operations and estimating teams to define the execution approach, to include teaming strategy, key personnel, project organization, and reporting structure 

•Writes or edits sections of the proposal as necessary 

•Coordinates with the Sales lead to develop and execute teaming strategies, to include the negotiation of teaming agreements 

•Supports the development and implementation of marketing communications plans for assigned pursuits 

•Assists with logistics and management of the capture team 

•Helps develop bid and proposal cost estimates and manages the approved proposal budget 

•Coordinates internal and external resources necessary to prepare proposals 

•Coordinates with corporate departments (e.g. finance, contracts, HR) to ensure an integrated capture approach 

•Supports the development and briefing of milestone reviews and bid/no-bid recommendations 

•Assists with the development and execution of specified milestone and color review teams 

•Supports the risk assessment and risk mitigation strategy 

•Contributes to the development of all proposal volumes 

•Participates in client meetings and presentations as required 

•Coordinates with the Operations Lead to prepare for project transition upon award 

•Ensures compliance with company policies and procedure

Qualfication : 

•Must have Bachelor’s degree and at least 3-5 years of professional experience, preferably in operations or business development roles.
•Must have a demonstrated ability to formulate winning technical, management, and cost strategies.
•Knowledge of Federal Acquisition Regulations (FAR) and the federal procurement process is essential.
•Excellent verbal and written communication skills required.


Heavy Mechanic
Location : United States

Description : 

* Responsible for trouble shooting & repairs of hydraulics, diesel, electrical systems and schematics. 

* Assemble, disassemble and reconfigure booms. 

* Complete parts purchase requisition with accurate information. 

* Complete/review and approves daily Safety Task Assessment (STA) and adheres to all safety requirements. 

* Perform inspections and eventually be able to certify machines annually. Crawler Crane experience. 

* Able to explain operation function and LMI programming to operators.

Qualification :

* 3-4 years of experience in maintenance repair 

* High School Diploma or equivalent 

* Literate in diagnostics and basic computer skills. 

* Some international travel required. 

* Able to obtain US passport.

  

Previous
Next Post »